Blind/roller blind application
2 outputs each form a channel (A, B, C, D) for blind or shutter control. Thus up to 4 blind or shutter drives can be controlled with one PowerBlock s4DC. Status objects can be assigned to each channel, which signal the current position or the end position "up" and "down" (binary). Parameters define the travel time for the up and down movement and for the slat or slot opening for roller shutters. Based on these parameters, blinds and roller shutters can be controlled precisely. Blind/roller shutter channels can be integrated into the internal facade module. For facade control, additional objects are available for the corresponding facade commands up/down, position and slat position. In addition, blind/roller blind channels can be integrated into additional functions of the application module.
Installation and connection
PowerBlock s4DC is installed on the standard 35 mm top-hat rail and has a width of 4 SU. All channels are supplied with an externel 24VDC voltage. The outlets of the channel form the control for the two travel directions up/down. PowerBlock s4DC actuators are connected to the KNX bus via the standard bus connector.
| Marca | : IPAS |
| Referencia | : 77024-180-11 |
| Familia | : Actuadores KNX |
| Color | : |
| Garantía | : 2 años |
| Devolución | : No |
| País de origen | : DE |
| Peso bruto | : 25 g |
| Largo | : 10 cm |
| Ancho | : 15 cm |
| Alto | : 6 cm |